General
|
| Carcasa Metal material, fan-free design |
| Peso Neto 0.35 kg (0.77 lb) |
| Peso Bruto 1.114 kg (2.45 lb) |
| Dimensiones (W X H X D) 170.00 mm × 27.60 mm × 93.10 mm (6.69'' × 1.09'' × 3.67'') |
| Temperatura De Funcionamiento 0 °C to 40 °C (32 °F to 104 °F) |
| Temperatura De Almacenamiento -40 °C to 85 °C (-40 °F to 185 °F) |
| Condiciones De Humedad 5% to 95% (no condensation) |
| Humedad Relativa 5% to 95% (no condensation) |
| Fuente De Alimentación 48 VDC, 2.5 A |
| Modo De Instalación Desk-Mounted,Wall-Mounted |
| Max. El Consumo De Energía 120 W |
| Consumo De Energía En Inactivo 10 W |
| Surge Protection 6 KV |
Parámetros De Red
|
| Puertos 8 × 10/100 Mbps PoE port,1 × 1 Gigabit RJ45 port |
| Tabla De Direcciones MAC 16 K |
| Tasa De Reenvío De Paquetes 4.17 Mpps |
| Caché Interna 4 Mbits |
| Capacidad De Conmutación 5.6 Gbps |
Fuente De Alimentación PoE
|
| PoE Standard IEEE 802.3af,IEEE 802.3at |
| Pin De Alimentación PoE 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) |
| Puerto PoE PoE: Ports 1 to 8 |
| Max. Puerto De Alimentación 30 W |
| PoE Power Budget 110 W |
Función De Software
|
| Largo Alcance |
| Ports 1 to 8: up to 300 m. |
| Long range performance may vary depend on camera model or cable condition. |
| HPP |
| Support one-click activation and remote management via Hik-Partner Pro. Functions supported: |
| 1. Display the port rate. |
| 2. Display the port bandwidth utilization rate. |
| 3. Display the PoE power usage. |
| 4. Display topology information. |
| 5. Display the alarm status. |
| 6. Restart ports and devices. |
| 7. Enable port long-rage mode. |
| 8. Remotely upgrade the device. |
| System Maintenance |
| Support device management via web. |
| Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. |
| Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. |
| Support management via Hik-Central Pro. |
| Support remote management via Hik-Partner Pro. |
| Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. |
| Supports 802.1ab LLDP for peer device discovery. |
| Support SNMP v1/v2c for third-party management platform access. |
| Support port mirroring for fault locating. |
