Código parte: K4GBD4-2666
MARKVISION's memory module is organized 64 bits in a 288 pin memory module, Based on 8bit DDR4 FBGA components per module.
The L O-DIMM is intended for use in applications operating up to 1333MHz clock speeds and achieves high-speed data transfer rates of up to 2666MHz.
288-pin, socket type small outline dual in line memory module (LO-DIMM)
Fast data transfer rates: 2666MHz
VDD = 1.2V (typical)
VPP = 2.5V (typical)
VDDSPD = 2.2–3.6V
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQgeneration and calibration
Single-rank
On-board serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Gold edge contacts
Halogen-free
Fly-by topology
Terminated control, command, and address bus
Operating temperature – Commercial (0°C ≤ TOPER ≤ +85°C)
Package 288-pin DIMM (halogen-free)
Frequency/CAS latency 2666MHz @ CL=19